New 35L Robo Brew Gen3 Single vessel Brewry

This is the 3nd generation of Robobrew which has big improvement based on old version. This All-In-One Semi-Auto brewery is developed for All-grain Brewing Brewery, it combined mash tun, boiler and chiller all in one, and in new this new version, it has add the build-in pump and sparge arm in it which make it much easier for recirculation and sparging. With this brewery, you don’t need anything else except grain and hops for your all grain brewing.

Beside all advantage of Generation 2, new version has improved for minor defects.

Beside the build-in pump and sparging arm, there’s also a piece of stainless steel seive can cover the grain tube to stop grain flow out when sparging. Also, to compare with Grainfather, there’s another false bottom on top of pump inlet to stop blocking of the pump.

With the Auto temperature control, you can keep the mashing temperature +/- 1C consistantly for hours, the inner bucket shall stay relative stable temperature as desired temperature. However, as most of other heating device, there’s some time delay between heating control and actual temerature, so there might be several degree difference between temperature showing on display and actural measurement for grain, so it’s better you involve in the control of heating/not heating manually if you want a better temperature control.

Also the new build-in holder will make it easier to hold the grain tube on top of the boiler, no need additional supporting frame.

The 2 rate heating power shall keep you flexible to use either for mashing or boiling.

The chiller can be easily connect with a garden hose to cool down your wort.

The boiler can also adapt with Still Spirits Alembic Dome and condensor for distillation.

Specification/Features:

Made of 304 grade stainless steel
Build-in Pump with pre-installed sparging arm which can be installed/dismantled easily
Additional stainless steel sieve cover on top of grain with support pole in middle
2 rate power heating : 500w + 1900w for maximum 2400w Heating capacity
With an inner bucket for mashing the grain, also make it easily run either batch sparging or circulation sparging by a pump
More compact and affordable
Compatible with Still Spirits T500 Condensor and Alembic Pot still for the boiler

Packaging:

1 x 35L Robobrew G3 Semi-automatic boiler/mash tun with false bottom to prevent blocking
1 x Inner grain bucket with false bottom and top cover sieve
1 x Stainless Steel Chiller which can sit inside the inner bucket and the boiler
1 x Glass lid with holes in middle

Note:

There will be some diviation for temperature between display and actual measurement of the grain when mashing, you’d better control the mashing temperature manually to adjust the diviation. Running the pump will shorten the diviation.

Also be awared that there’s lock for ball valve tap, you need release the lock before you want to open the tap