StillMate Multi-Purpose 50L/240V/2400W Electrical Boiler/Fermenter/Kettle

This is 50L 240V/2400W electrical boiler/fermenter or kettle for a still or storage tank.
It comes with a stainless steel lid with 4″ ferrule on top so that you can use it for a 4″ distillation column.
It also comes with 48mm Hole Cover plates for the 4″ Ferrule so that you can use this boiler for still spirits T500 condenser or Alcoengine condenser.
The boiler comes with a 3″ dial thermometer and a 1.5 ” ball valve for drainage.

The lid was sealed with 3 clamps which make sure there’s no risk of leaking when boil.
The 2400w heat elements was installed by 2 inch tri-clover fitting with clamps so that you can easily remove or exchange the elements.
There’s another 2′ port can be used for install an extra 2400W heat element so that you can have 2 x 2400W heating capacity.
The boiler can run as a fermenter after put the silicone bung and airlock into the hole.

Specification

Stainless steel 304

Height 700mm without lid

Wall thickness – 1.5 mm

Lid Thickness – 1.0mm

Bottom thickness – 5mm

1 x 240V/2400w Heat element with 2″ fitting. 

Extra 2″port for install extra heat element

Features&packing:

-Made of high quality Stainless steel 304
-50L capacity
-Clamp for lid SUS304
-Silicone gasket for lid
-1.5″ Ball valve stainless steel 304
-2″ Clamp 5pcs
-2″ End cap 2pcs
-4″ cover plate with 48mm hole 1 pcs
-1 x 240v/2400w Heat element with Australian standard Cord