65L Stillmate 4 x 4″ Crystal Clear Bubble Plate Still Kit Frew power Station

Description:

This is Crystal Clear version 4 x 4″ modular still with 4 inch bubble plates. The crystal clear column let you have a better view of the activities of distillation.

The boiler is Kegland’s 65L digiboil which comes with temperature display and control as well as combination of 500w/1000w/2000w heating capacity. Furthermore, now we supply you with a 4000w power station to adapt the boiler with your normal home power socket by reducing the output to maximum of 2400W. By doing that not only you can just run this still with a normal power supply at home, but also can adjust the heating power step-less between 500W to 2000W by adjusting the power output voltage, even it may take a longer time to pre-heat the boiler.

The 4 x 4″ bubble plates are fixed within the polycarbonate sight glass and each bubble plates has 5 x raiser caps and 1 x down caps in copper plates. The 4″ crystal clear column has stainless steel fixture and all the copper caps and plates are made of >99.95% pure copper.

This advantage of the ultimate in distilling for those that want one still that can do it all, each plate means each distillation process to refining the spirits as neutral as it can. In principle the more plate you use the more neutral it will be, but it make less sense after 4 still/plate. However, we can supply extra still plate modular/bubble tee to add-on yourself if you want a better setup.
The still come with is a 65L digiboil and heavy-duty stainless steel dome/lid which allow you run the still by electricity
You still can run this still as pot still if you don’t run(or run less) cooling water on top of the 4 plates to grab more flavor from what you brewed.
All still was made with high level of manufacturing in quality.
The kit comes with cooling water hose and valves as well as a set of precision alcoholmeters with the temperature correlation table.

Features:

Made of high-quality stainless steel and polycarbonate
4x 4″ column installed in the polycarbonate tube
Push-in fittings for cooling water in/out
240V/3500W 65L digi boiler
Heavy-Duty stainless steel dome/lid with 4″ tri-clover fittings
Sight Glass on lid
Dual Thermometer which has 1 graduated degree l
Now with free power station with >4000w output.

Packaging:

44 X 4″ Complete Bubble Tee Assemble
1 x Big screen digital thermometer
1 X 2″ Condenser
1 X 4″ Dephlegmator
1 X Parrot Complete Assembly
1 X Top U Bend or 2 x 90C elbow tube
1 X Parrott extension
1 X 240V/3500W/65L digiboil boiler
1 x Heavy-duty Stainless steel lid with sight glass and thermometer
1 set of precision alcohol meter with correlation table for temperature
1 set of cooling water hose with push-in fittings and valve
All tri-clover seals and clamps required
1 x power station/voltage regulator with >4000w output
Instructions

Note:

We shall send all piece and parts without assemble, you need assemble yourself