30L FermZilla All Rounder Easy-Grip Pressure Fermenter Starter Kit

This brewing kit has been put together by those who want all the benefits of an affordable pressurisable fermentation/transfer vessel, but don’t want the extended cleaning times that one would normally do with a Conical FermZilla. That isn’t to say that this is better than the others, it is simply the best All Round solution for one with a busy life schedule who also wants to brew the absolute best that they can.

This is the ideal starting point for any new brewer looking to get into pressure fermenting; or simply someone who wants to transfer out of the vessel using pressure to lessen oxygen pick up in their final beverage. The perfect scenario is always going into a stainless steel 19L or 9.5L kegs with Low2 O-Rings post fermentation.

Features:

• Made of high-quality Stainless Steel 304
• Pressure fermenting design.
• With 3″ butterfly valve and collection jar
• Pressure fermenter lid with a 80cm silicone dip tube with a stainless float
• Compatible with 4 Inch TC Kegmenter Lid with Ball Lock Posts, Floating Dip tube and PRV (Red 2.5Bar) which we sell it seperately.

Packing:

• 1 x KL15189 – 30L All Rounder FermZilla Base Kit with Easy-Grip Threaded Lid Ring
• 1 x KB03937 – FermZilla All Rounder Hex Base with 24 x Sticky Dots (Pre-attached)
• 1 x KL10788 – Red Carbonation Cap (GAS IN)
• 1 x KL10788-Yellow – Yellow Carbonation Cap (LIQUID OUT)
• 1 x KL17060 – Yellow Weighted Stainless Steel Float with Silicone Dip Tube and Mesh Filter (You will need to cut this to your desired depth based on what you are fermenting)
• 1 x KB03529  – Integrated Gauge BlowTie Kit (0-15psi)

  *The above items cannot be removed / altered within this kit*

Warnings:
Keeping the units out of direct sunlight is a must for all PET fermenters. Sunlight degrades PET.

Please note:
When using this vessel under pressure. You must perform a water pressure check to ensure your connections are leak proof. To do this. Fill your FermZilla up with water, then apply a minimum of 15psi pressure to the vessel. Check for leaks around all Cap / Threads.