StillMate 100L Multi-Purpose 240V/5500W Electrical Boiler/Fermenter/Kettle

This is new 100L multi-purpose Boiler/Fermenter/kettle with 240V/5500W heat elements which is removable from the 2″ Tri-clover port, and you have choice of 3600W/2400w heat elements as replacement of 5500w heat elements.
It comes with a stainless steel lid with 4″ ferrule on top so that you can use it for a 4″ distillation column.
It also comes with 48mm Hole Cover plates for the 4″ Ferrule so that you can use this boiler for still spirits T500 condenser or Alcoengine condenser.
Also, with the silicone bung and airlock, you can use this boiler as a stainless steel fermenter.
The boiler comes with a 2″ dial thermometer and a 2″ Positioned ball valve for drainage.
If you like, you can remove the thermometer from the 1/2″ BSP fitting and install a thermowell for putting the probe of a digital temperature controller.
The lid has a pressure relive valve for safety purposes.
The lid was sealed with a 360C tri-clover belt clamp which make sure there’s no risk of leaking when boil.
There’s also extra 2 of 2″ port on the bottom and 1 of 2″ port covered by cover plates for your other needs, for example, to put extra thermometer of heating element etc.
Please note the heat element of 5500w/3600w need re-wiring to connect power source, while 2400w can be supplied with cord and plug.
This boiler also got compound bottom for direct fire heating.

Specification

Stainless steel 304

Height 650mm without lid

Height 750mm with lid

Wall thickness – 1.2mm

Lid Thickness – 1.2mm

Bottom thickness – 6mm

240V/5500w Heat element with 2″ fitting. The element can be replaced by smaller one

Features&packing:

-Made of high quality Stainless steel 304
-100L capacity
-Ball lid
-Safety valve
-Clamp for lid SUS304
-Silicone gasket for lid
-3/4″ Ball valve stainless steel 304
-2″ Clamp 5pcs
-2″ End cap 3pcs
-4″ cover plate with 48mm hole 1 pcs
-240v/5500w Heat element which needs wiring work on your side. This heat element can be changed for 3600w or 2400w
-2′ dial thermometer
-Silicone Bung and airlock