Stillmate 65L Copper 4 x 4″ Plate Colume Modular Micro Distillery – Free Power station

Description:

• This is full copper 4 x 4″ modular still with 4 bubble plates colume with dephlegmator and condensor as well as a copper parrot.

  The reason for using a multi-bubble plates colume is to purify the alcohol like multi-time distillation. For detail, the below link will help you to understand the principles.(copy the link and paste into browser)
  https://www.youtube.com/watch?v=M7AL7-44YTc

  In general, it make less sense after 4 plates if you want it run as a pot still. However, we can supply extra still plate modular/bubble tee to add on yourself if you want a better setup.

  The reason for using copper for the distillation colume mainly because
  Copper absorbs sulfur-containing compounds and yeast cells which are produced during fermentation and the presence of which is undesirable in the distilled spirit or essential oil. Sulfur compounds and yeast cells
  smell. Copper keeps the distillate sweet;
  Copper reduces bacterial contamination;
  Copper has excellent heat transfer properties, helpful for both heating and cooling of vapours;
  Copper prevents the production of ethyl carbamate which is a toxic substance formed from cyanides (cyanides are found in the stones of fruits);
  Copper also improves the quality of the final product. If the quality of the mash is not microbiologically perfect, copper will improve the aroma of the final product.

  This still comes with is a 65L Digi boiler(240V/3500w/15amp plug) and heavy-duty Copper dome/lid. Also we shall give you free a power regulator or power station which allow you to run this still by a 10 amp plug with power output control. It will take longer time for distillation but it will help you solve the problem to find a 15 amp power supply at home if you don’t have one. Anyway, the stepless power output control will give you more flexibility for power control.

 https://www.youtube.com/watch?v=NonKN3YAMHE

Features:

Made of high-quality copper for tee assembled bubble plates/dephlegmator/condensor/parrot

4 x 4″ Add-on bubble tee assemble
Push-in fittings for cooling water in/out
65L boiler with 240V/3500w(500w/1000w/2000w combination) heating rate and temperature controlled
Choice of add-on the helmet as shown in picture
Heavy-Duty copper lid with 4″ tri-clover fittings
Sight Glass on lid

Packaging:

• 4 X 4″ Complete full copper Bubble Tee Assemble
  1 x Copper Dome/lid fit for boiler
  2 X Dial Thermometer
  1 X copper dephlegmator
  1 X copper Condenser
  1 X copper Parrot Complete Assembly
  1 X copper Top U Bend
  1 X 65L boiler with 240V/3500w(500w/1000w/2000w combination) heating rate and temperature controlled
  1 x Alcoholmeter
  1 set of cooling water hoses with push-in fittings and valve
  All tri-clover seals and clamps required

Note:

   The power station can afford short time output >2000w but try to avoid using it because it may burn the power station. To be safe, keep output <2000w. And the power station can only adjusted when the heater turn on.